How it goes together

Three steps, no special tools. Clear a bench or set up two trestles, and follow the guide included in the carton. A first-time assembler takes about 30 minutes using only the mallet supplied.

A flat-pack coffin lying on its carton: pine boards, wooden handles and a rolled cotton liner

1. Open and check

Open the carton and check the parts against the parts checklist inside.

A hand holding a mallet above a wooden dowel being driven into a board joint

2. Assemble the parts

Follow the instructions guide. Connect the components with dowels and the mallet supplied.

Solid pine coffin seen from above on grass, with white roses on the lid

3. Furnish the coffin

Furnish the coffin by laying down the absorbent pad, securing the liner and adding a pillow.

Watch it go together

Placeholder film showing the assembly principle on a different coffin design. The Nestwood assembly film will replace it.

Storage and handling

Stores flat in a single compact carton (about 15 cm deep, design target), saving floor space in your premises
Keep the carton dry. A care and storage note is available on request.
Weight to be confirmed when the sample is weighed. Solid timber is heavy, so plan for a two-person lift.
The assembly guide and parts checklist come in the carton
A PDF assembly guide will be available under Guides and downloads

Questions about assembly?

Ask us for the assembly guide and the specification sheet.

Request trade pricing